Epoxy Doming Resin x 1

Epoxy Doming Resin x 1


Epoxy Doming Resin with Nozzle
Shipping & VAT will be added at checkout

  • Product Info

    This is 1:1 ratio Epoxy Resin for Doming. This resin is semi-felxible and cures if left overnight (in about 12 hours) to form a perfect dome. Resin should be cured to at least constant room temperture of about 18 degrees centigrade.

    When curing resin, please ensure that it is covered adequately and is located in a dust-free area. Please ensure that the surface is also flat and the sticker sheet is held down firmly by using masking tape or similar.

    When using resin for the first time, dispense 2-3 bursts into an old jar or cup. This helps the two-part resin and hardener mix in well before applying to your pre-cut print media.


    Epoxy resin can be part-used and sealed. However, you will need to use a fresh nozzle each time you reuse the resin as the previous one would have cloggeed up. We do supply spare nozzles in our shop.

    Epoxy resin is good for promotional items but not suitable for outdoor use as UV light from the sun's rays can yellow the resin over a period of time. If you wish to buy resin for outdoor use, please purchase our Polyurethane resin. 


    Please note, that whilst the polyurethane resin is UV light-fast, images printed via a normal inkjet printer will not be, and as such, will fade over a  period of time.

    Help & Support
    If you have any queries or require any advice, please feel free to send us an email or contact us on 01708-731294.

We support Marie Curie,
please donate generously.

Tel: 01708-731294   or   01708-747171
email: cplsales@print1.co.uk
  • White Facebook Icon
  • White Twitter Icon
  • White YouTube Icon
  • Pinterest - Grey Circle
  • White Instagram Icon

 Copyright  2020
  Creative Printers of London -  Since 1986